Test

By combining an air door with your currently installed door, you are ensuring an efficient air block when your hard door is open, reducing cold air loss and decreasing the problems associated with high-traffic openings, such as ice and safety concerns.

Features

• Maximizes the energy efficiency of a roll-up door
• Effectively reduces moisture infiltration
• Significantly reduces air exchange between rooms of differing temperature
• HCR Model AC and CAC is retrofittable to existing roll-up doors of any brand
• Additional air doors can be added in a modular process to keep maximizing energy efficiency as door open time increases
• Warm side or cold side mounts

The Model DCAV uses two recirculatory air curtains, creating an air vestibule between the two air streams where the air is captured and treated to a non-frost, non-fog state.

The Model DCAV automatically adjusts as conditions change to optimize performance and reduce energy consumption.

With the use of HCR sensors and software, Model DCAV can be integrated into a facility’s refrigeration control and monitoring system. This allows not only remote monitoring, but remote adjusting of the HCR equipment.

FEATURES

• No frost, fog or icing
• Eliminates safety hazards
• No haze within cold room
• Reduced maintenance costs
• No frost on stored products
• Reduced refrigeration loss
• Reduced coil defrosting burden
• Increased warehouse productivity
• Improved refrigeration cycle efficiency
• Sublimates existing frost buildup

Dock Wedge Series DW allows complete and unobstructed access to the full width and height of the trailer interior and shipping door while providing outstanding weather protection. The trailers back through the vertical pads forming a wiper seal that hugs the trailer’s sides with a header curtain that sits on top of the trailer unit, thus allowing full access to the height of the trailer. The resilient vertical foam pads with removable inward vertical panels, create a tight seal that blocks out foul weather, insect, dust, dirt and may reduce pilferage while saving money on energy costs. Dock seals help productivity by increasing safety and protecting personnel, products and equipment.

Features

• Header curtain that sits on top of the trailer unit
• Resilient vertical foam pads
• Removable inward vertical panels

The Dynaco M2 high speed freezer door reduces energy loss without slowing traffic.

Features

• Unique “Push-Pull” Drive System: Provides high-speed travel in open and close mode for a total cycle time unmatched by conventional gravity doors.
• Operating Speeds: Of up to 96″ per sec open and 70” per sec close, offers the industry’s fastest cycle time.
• Curtain: Incorporates a patented edge retention design.
• Tight Seal: Continuous end locks encapsulated by the side guide, mobile top seal and soft bottom edge provide a virtually perfect seal. No blade or brush system to wear or replace.
• Ultra Safe Soft Edge Design: Exclusive soft edge with no bottom beam provides employees and equipment superior protection associated with hard-edge doors.
• Side Guides: Galvanized steel with pivoting, spring-loaded UHMW inner side guides allow for movement and deflection under pressure. A polyethylene layer creates a thermal barrier
• between the door frame and building structure. Resistance heating in the side guides prevents frost and ice buildup.
• Curtain Material: Reinforced PVC suitable for applications to -22F. Optional Insulated panel, Speed 85″ open and 70″ down (size dependent).

The Dynaco M2 Power high performance door is a medium-sized high speed door for moderate size entryways with push/pull technology to drive fast opening and closing.

Features

• Unique “Push-Pull” Drive System: The direct drive system provides high-speed travel in open and close mode.
• Exclusive Soft Edge: Provides employees and equipment with superior protection against accidents and maintenance associated with hard edge doors.
• Wind Load:Tested to Class 3 (EN Standards) for max dimensions. Withstands pressures up to 75.6 MPH (2.8 in. of water) (700 Pa).
• Tight Seal: Continuous end locks encapsulated by the side guide, mobile top seal and soft bottom edge provide a virtually perfect seal.
• Side Guides: Formed of galvanized steel with pivoting, spring loaded UHMW inner side guides which allow for movement and deflection under pressure.
• Drive Unit: 1 HP or 2 HP Variable Speed, direct drive IP65 motor with electronic braking and absolute encoder (Set \Limits from NEMA 4 Control Box).

The EH Leveler combines superior structural steel characteristics with an economically efficient hydraulic system

Features

• Push-button activation
• Hydraulic operation
• 25,000 – 60,000 CIR
• Structural steel with plate outboards, four-sided box construction
• Piano-style front and rear hinges
• Inverted hoist cylinder with external velocity safety stop
• Standard lip cylinder
• Sliding toe guards
• Sequence valve
• Max standard width – 7′
• Max standard length – 10′

The Metro Dock Electric Hook Restraint is face of wall mounted and uses a floating head, which allows for continued pressure on the ICC bar, adjusting to any trailer movements. An eco-friendly alternative to the Hydraulic Truck Restraint, the Electric Hook Restraint is electrically operated with the aid of a complete interior and exterior communication package.

Features

• 32,000 lbs restraining strength
• 110 volt
• NEMA 12 control panel with engage/disengage selector switch and key-controlled override switch
• Communication package: Interior/Exterior red/green LED lights; Interior/exterior mirrored image warning signs; Interior control panel with red/green/amber lights
• Zinc-plated

When size does matter, choose Poweramp’s® HM Series heavy-duty mechanical loading dock leveler. With 29 inches of direct rear hinge support and a high-strength deck constructed of a combination of structural steel “C” channels and “I” beams, the HM Series provides exceptional structural superiority for heavy-duty applications.

HM Series Levelers come in 6’, 6’6” and 7’ standard widths and 6’, 8 and 10’ standard lengths. Other lengths may be available. Standard capacities for the HM Series are 30K, 35K, 40K,45K and 50K CIR.

Features

• Standard capacities – 30K, 35K, 40K,45K and 50K CIR
• Standard lengths – 6’, 8’ and 10’
• Standard widths – 6’, 6’6” and 7’

Metro Dock Hydraulic Dock Levelers are easy to operate, convenient to use and are the most cost efficient model over their lifetime. They are operated by a single push button control with a constant pressure feature to ensure safety throughout their cycle and are designed with a four-inch tilt in the rear hinge to compensate for any uneven truck beds. The North American-made hydraulic components are reliable and supported by a five-year warranty.

Features

• Formed beam and I-beam constructions
• Made for capacities of up to 100,000 lbs
• Multi-viscosity oil
• 1HP Power Packs available in any voltage
• Automatic fall-safe protection
• Maintenance strut supports deck and lip for under-deck inspection and maintenance

DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean and completely safe. If the door curtain comes out of its guides (for example, in the event of impact with a forklift), the system will automatically reset the curtain back into the guide on the next open cycle

Features Up to 100″ per second Self-repairing Inverter and encoder standard Oil-free guides allow doors to withstand wind loads Minimal maintenance Quiet operation Soft-touch bottom edge/bottom rail Wireless safety edge or unroll sensor Photo eyes mounted inside side columns Low profile side columns

Features

• Up to 100″ per second
• Self-repairing
• Inverter and encoder standard
• Oil-free guides allow doors to withstand wind loads
• Minimal maintenance
• Quiet operation
• Soft-touch bottom edge/bottom rail
• Wireless safety edge or unroll sensor
• Photo eyes mounted inside side columns
• Low profile side columns

Outside door openings are very often large and exposed to high wind. The Dynamicroll® B-Drive is an innovative high-performance high-speed door, designed to operate in these harsh conditions. Thanks to the push and pull system, the door drives smoothly up and down and guarantees door closure after cycling. A tight, near perfect perimeter seal is formed around the door. Anti-torsion zippers prevent the fabric from twisting after impact, allowing the door to re-insert without jamming.

Installing a Dynamicroll® B-drive High Speed Door should help resolve all of your door challenges. The fast operation of the door improves traffic flow, and the tight seal protects against bad weather conditions and increases energy savings. No stiffeners or rigid parts in the door curtain boosts safety for workers and goods. These doors are suitable for exterior openings up to 26’ wide, depending on application.

Features

• Standard opening speed ~6.5 ft/s
• Wind resistant
• Self-lubricating
• Plug and play, easy to install
• High security, no hard parts in the fabric
• Self-reinserting low maintenance
• Sealing
• Energy-saving

The DynamicRoll® CB 230 is a highly reliable high-speed door intended to keep your cleanroom clean. Its fast speed and tight full perimeter seal keep your over pressured environment sterile, allowing the ventilation and air purification systems to operate correctly.

This door operates flawlessly in interlock systems with multiple DynamicRoll® CB 230 High Speed Doors. No stiffeners or hard parts are used in the door panel. An escape function is standardly built in. The door seals the floor with a soft bottom edge.

Features

• Features Standard opening speed ~6.5 ft/s
• Wind resistant
• Lubrication-free
• Plug and play, easy to install
• High security, no hard parts in the fabric
• Reliable
• Air-sealing
• Energy-saving

The DynamicRoll® CB 125 High Speed Door is the perfect door for your cleanroom application. This high-speed, roll-up door is designed to separate overpressured sterile environments.

Thanks to the tightness and its special sliding system, the DynamicRoll® CB 125 High Speed Door guarantees controlled loss of pressure and allows the ventilation system and air purification to operate correctly. Airflow between rooms is limited, reducing the risk for contamination and air pressure loss.

Features

• Standard opening speed ~6.5 ft/s
• Air-sealing – 12 m3/m2/h at ~ 50 Pa
• Lubrication-free
• Plug and play easy to install
• High security, no hard parts in the fabric
• Reliable/low maintenance
• Sealing
• Energy-saving

DynamicRoll® PE (polyethylene) high-speed soft bottom edge doors are fast, self-repairing, easy to clean and completely safe.

If the door curtain comes out of its guides (for example, in the event of impact with a forklift), the system will automatically reset the curtain back into the guide on the next open cycle. Designed for heavy washdown.

Features

• Up to 100″ per second
• Self-repairing
• Side frames and header bearing brackets are solid
• polyethylene – no voids
• Inverter and encoder standard
• Oil-free guides
• Minimal maintenance
• Quiet operation
• Soft-touch bottom edge/bottom rail
• Resistive wireless safety edge or unroll sensor
• Photo eyes mounted inside side columns
• Low profile side columns

DynamicRoll® FRIGO AIR 1 is a self-repairing roll up door with a special layered curtain composed of PVC/polyethylene expanded/ PVC curtain.

The insulating segments on the curtain avoids the icing creating a thermal cut with a continuous insulation on the curtain. Thickness of the curtain is about 18mm. The frame structure is equipped with heating cables placed in the sliding system and in connections to avoid condensation and icing of the curtain.

These features make doors ideal for refrigeration fields to divide environments with different temperatures with humidity less than 30%.

Features

• Self-repairing
• Rapid
• Sealing
• Noiseless
• No rigid elements inside the curtain for 100% safety
• Plug and play (easy to install)
• Low maintenance
• Insulating – Thermal K 2,2 Wm2K

Frigo2 Freezer high-speed soft bottom edge doors are fast, self-repairing, easy to clean and completely safe.

At the heart of the Frigo2 is our innovative double curtain low energy cost design. When closed, the two curtains create a dead air space, which is then treated with a small amount of heated air. This allows the curtains to remain frost free at the lowest energy expense. It also allows it to be either warm side or cold side mounted.

If the door curtains come out of their guides (for example, in the event of impact with a forklift), the system will automatically reset the curtain back into the guide on the next open cycle.

Features

• Up to 100″ per second
• Self-repairing
• Soft bottom edge
• Inverter and encoder standard
• Oil-free guides allow doors to withstand wind loads
• Minimal maintenance
• Quiet operation
• Wireless safety edge or unroll sensor
• Photo eyes mounted inside side columns

High-speed spiraling doors are very suitable to be installed when security is an issue. BMP Doors USA’s ThermicRoll® High Speed Door is a high quality aesthetically pleasing door, made of steel or aluminum. Spiraling doors have a thermal-acoustic insulated door panel that can be made with or without vision. When closed, the door seals all sides of the opening creating a thermal break from the outside.

A MegaPack® fold-up high performance door is the perfect solution for closing off large areas in your facility, for large hangars and for environments with overhead cranes.

Features

• Standard opening speed ~ 2 ft/s
• Wind resistant to 100 m/h
• Conical uprights
• Double motorized
• Reliable
• Low maintenance
• Heavy-duty
• Works at under/overpressure

The Pack® High Speed Door is a fold-up door that fits large openings, whether inside or outside. The galvanized steel frame is self-supporting. The curtain is made of PVC and reinforced with horizontal steel bars.

This robust door is very reliable, withstanding and operates under high wind and air pressure. Thanks to its patented guides, air leakage is low, creating a pleasant work environment. Pack doors are fitted for all kinds of industry or large hangars.

• Features Standard opening speed ~ 2 ft/s
• Wind resistant to 100 m/h
• Conical uprights
• Double motorized
• Reliable
• Low maintenance
• Heavy-duty
• Works at under/overpressure

High-speed spiraling doors are very suitable to be installed when security is an issue. BMP Doors USA’s ThermicRoll® High Speed Door is a high quality aesthetically pleasing door, made of steel or aluminum. Spiraling doors have a thermal-acoustic insulated door panel that can be made with or without vision. When closed, the door seals all sides of the opening creating a thermal break from the outside.

The door is very reliable and requires little maintenance. The small footprint takes up less valuable floor space. No need for ceiling anchors when mounting the door. The doors are undoubtedly a good choice for outside building applications where security is concerned, as well as interior doors where valuables or pharmaceuticals are stored.

Features

• Standard opening speed ~6.5 ft/s
• Wind resistant
• Self-lubricating
• Plug and play, easy to install
• High security, no hard parts in the fabric
• Self-reinserting low maintenance
• Sealing
• Energy-saving

The Jamison BMP VersaFlex® was specifically -designed with every component being a part of the hittable process. Using Jamison’s patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck. The Shearflow design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components.

Features

• Unique panel design
• Superior trailing edge assembly for excellent door seal
• The living hinge—Panels are independent of carrier
• The highest R-Value for a hittable door—Select from R10 to R32
• The industry’s best operator—Select between the dual speed Powertron® or the Powertron digital controller.
• Retrofittable panels—Exchange your Jamison Mark IV® hard door panels with flexible VersaFlex® hittable panels.

The LHP Leveler utilizes cost-effective hydraulic technology with our efficient deck and frame design to produce a reliable, price sensitive hydraulic dock leveler.

Features

• Push-button activation
• Hydraulic operation
• 25,000 – 40,000 CIR
• Four-sided box construction
• Piano-style front and rear hinges
• Hoist cylinder with external velocity safety stop
• Standard lip cylinder
• Sliding toe guards
• Sequence valve
• Max standard width – 7′
• Max standard length – 8′

Miniature/small version of CAC for conveyors.

MCAC Miniature Conditioned-Air Curtain The temperature differences at conveyor openings, if unprotected, are subject to the same problems as regular doorways. Prevent air infiltration, frost, and ice buildup by installing HCR equipment designed to work seamlessly with your conveyor system.

Conveyor units are tailored to suit your specific application in coolers, freezers, or ambient temperatures. HCR project managers and engineers will discover every detail to assure the right solution for you.

Features

• Prevents air infiltration
• Prevents first buildup
• Prevents ice buildup
• Protects the differences in temperature

Metro Dock’s Mechanical Dock Levelers are the economical and safe solution for basic loading dock applications. They are manually operated and easy to use. To operate, simply pull the release chain located at the rear of the deck. The dock will rise and the lip will extend, at which point the dock leveler can be walked down onto the truck bed for safe loading or unloading. Metro Dock’s reliable deep toothed ratchet hold down system is designed with positive locking traction that increases safety and reduces maintenance.

Features

• 4” tilt compensating for uneven truck beds
• Heavy-duty extension springs
• Maintenance strut supports deck and lip for under-deck inspection and maintenance

The basic NPAC model is made to counteract the one-way flow-through forces caused by negative building pressure or by wind effects

Features

• Single nozzle and intake
• Proprietary nozzle design
• Greatly diminishes one-way air flow caused by building air imbalances
• Horizontal, curvilinear, recirculatory air flow
• Powder-coated steel
• Metal-clad insulation when required

The Jamotuf® product line is the perfect combination of form and function.

Features

• Color pigment molded into the frame profiles
• Corrosion resistant FRP 1 3/4″ panel
• Durable
• Low maintenance
• Pultruded fiberglass frame standard
• Color pigment molded into the panel and the frame profiles
• Gasketing available to prevent thermal infiltration
• Lifetime corrosion warranty

We service all makes and models of overhead or sectional doors. Please contact us for pricing and recommendations.

There are many components that ensure a safe material handling operation. One of the most important is an effective, dependable truck restraining system like the PowerHook® by Poweramp®. The PowerHook® vehicle restraint is the most effective truck restraining device available on the market. By actively seeking, finding, and securing a trailer’s “Rear Impact Guard” (RIG), the PowerHook® eliminates potential problems between the truck and the dock leveler.

The PowerHook® restraint is firmly anchored in the loading dock pit for maximum holding strength. The hook remains recessed and protected behind the pit wall until activation, making it easy to maintain the dock exterior. Because it stores in the pit, the restraint is completely concealed and out of the way. This is a great advantage when clearing the drive approach of snow or debris.

The PowerHook® is designed to withstand a pulling force in excess of 35,000 lbs, providing an extra margin of safety and protection. This restraint has the widest service range in the industry with a horizontal range of 0” to 15” from the building and a vertical range from 7” to 34” off the drive. Extended ranges are available for special applications. With over 10,000 applications over a twenty year period, the durability and reliability of PowerHook® is unmatched in the industry. Be sure to specify the original PowerHook® on your next loading dock application.

Features

• Horizontal range from a building – 0” to 15”
• Vertical range off the drive – 7” to 34”
• Withstands pull force in excess of 35,000 lbs

The PR Series is a heavy-duty, premium quality loading dock leveler that provides unmatched productivity and safety with a superior structural steel design. The PR Series is completely hydraulic in both engineering and operation.

Features

• Push-button activation
• Hydraulic operation
• 30,000 – 120,000 CIR
• Structural steel with channel outboards, four-sided box construction
• Piano-style front and rear hinges
• Hoist cylinder with internal velocity safety stop
• Recessing lip cylinder
• Folding toe guards with 24″ pit
• Fluid logic block
• Optional barrier lip Maintenance check plate on deck Max standard width – 7′
• Max standard length – 12′

The Model RCAV is a short, conditioned-air vestibule for freezer to outer room conditions that span large temperature differentials up to 100 degrees with average doorway traffic and limited floor space around the door. It significantly reduces refrigeration load while preventing frost, ice and wetness at the doorway. It consists of two high-speed rollup doors, and a heated horizontal, recirculatory air curtain between the doors. It is equipped with a PLC or Solid State automated control to regulate the amount of air and heat required.

Features

• Elimination of ice, frost, condensation, fog and haze
• No frost on stored product, ceiling, walls, racks or floor
• Reduced moisture gains into freezer
• Reduced refrigeration loss
• Reduced infiltration air into freezer
• Reduced compressor runtime and defrost cycles
• Improved refrigeration cycle efficiency
• Improved visibility and safety
• Improved productivity and energy efficiency
• Reduced maintenance costs
• Existing ice and frost buildup sublimates
• Great return on investment (ROI)

We service all makes and models of overhead or sectional doors. Please contact us for pricing and recommendations.

The S10 Dock Seal consists of durable foam side pads and a head pad to cushion the truck against the building and create the tightest seal for optimum energy efficiency and cleanliness. This dock seal is best suited to a dock where traffic is consistent.

Features

• For openings up to 8’ wide x 8’ high
• 2 side pads 96” high x 10” wide x 10” projection
• 1 head pad 116” wide x 10” high x 10” projection
• Seals trailer heights 144”-156” on a 48” dock height
• Head pad can be raised to accommodate trailers up to 162”

The S20 is a great solution for docks that receive trucks and trailers of varying heights. Once the truck is backed into the side pads, the head curtain is lowered using a pulley and cleat system to form a tight seal.

Features

• For openings up to 8’ wide x 10’ high
• 2 side pads 120” high x 10” wide x 10” projection
• 1 head curtain 116” wide x 10” projection x 24” drop
• Seals trailer heights 144”-162” on a 48” dock height

The Metro Dock Stationary Truck Shelter is constructed of flexible vinyl fabric to wrap around the truck sides creating an unobstructed opening for full access to the interior of the trailer.

Features

• For openings up to 10’ wide x 10’ high
• 2 side units 126” high x 24” wide x 24” projection
• 1 raked head curtain 138” wide x 24” projection x 36” drop
• Seals trailer heights 144”-162” on a 48” dock height
• Pleats allow for 20” depression to the bumper
• 24” yellow guide stripes
• Double stitching of all seams
• Pressure treated lumber frame
• Bottom pads with “NO STEP” decal
• 30” protective steel guards

The L-shaped side pads of the S70 Dock Seal flex against the side of the incoming truck to create a tight seal without obstructing the opening. Great for trucks of varying widths, this seal is also equipped with a head curtain for varying truck heights.

Features

• For openings up to 10’ wide x 10’ high
• 2 side pads 126” high x 16” projection
• 1 head curtain 136” wide x 16” projection x 30” drop with Velcro splits
• Seals trailer heights 144”-162” on a 48” dock height
• Complete with bottom draft pads

The Metro Dock Water Guard is a canopy application that can be mounted above existing head pads, curtains or by itself. It seals against the roof of the trailer with the sweep pad and deflects rain to the sides, keeping workers safe and your product dry.

Features

• 123” wide x 24” projection x 12” storage curtain
• Sweep pad 6” foam pad x 24” drop
• Double-layered vinyl on face of sweep pad
• Solid 40 oz vinyl wear pleats across face
• Pressure treated lumber frame
• Metal side frame

Designed to work best where the vehicles are generally a standard size, the 0101 is an economical way to form an air-tight seal between the building and the back-end of the trailer. The resilient foam pads can be covered with a large selection of tough abrasion resistant fabrics, creating a tight seal that blocks out the foul weather, insect, dust and may reduce theft while saving money on energy costs. The Series 0101 Dock Seal will increase the comfort and productivity by increasing safety, protecting personnel, products and equipment. Super Seal’s series 0101 dock seal has standard dimensions for door openings, 8′ x 8’ have (2) 8′ high vertical pads and one 10′ long head pad with 12” face and are cubed-shaped. The 0101 seals trailers 12′ to 13′ H from grade with a dock height of 48”. Can be fitted for openings up to 9’0”W x 9’0”H by the use of wedge-shaped vertical and head pads.

Super Seal’s series 0101 Dock Seal are manufactured using kiln-dried pressurized wood and a high density, lightweight urethane foam core with 98% compression recovery and maintaining flexibility at -40 degrees (fire retardant formula available). The foam core shall be continuously bonded (not spot glued) to the wood backing with a high quality, non-flammable elastic adhesive. Cover fabric overlaps the wood backing, totally enclosing it, and is fastened with heavy duty plated staples.

All foam pads are vented through brass plated grommets allowing air to be exhausted and moisture to drain when pads are compressed. Vertical pads are tapered cut at the bottom to prevent sagging, pinching and wearing when compressed. Vertical pads have a 24”h or optional full height 4” yellow guide strip to aid in spotting trailers. Unit shall be furnished with all necessary mounting hardware, galvanizing to resist corrosion.

A large selection of cover fabrics available including our exclusive SS-90-1 high performance vinyl and 16 oz vinyl “RipStop”. Other fabrics and colors are available include: hypalons, neoprenes and vinyls.

Features

• One 10′ head pad with 12” face
• Seals trailers heights – 12′ to 13′ from grade with a dock height of 48”.
• Can be fitted for openings up to 9’0”W x 9’0” high by the use of wedge-shaped
• vertical and head pads

The Jamotuf® product line is the perfect combination of form and function.

Features

• Clean and hygienic
• Durable
• Corrosion resistant
• Type 304 or 316 stainless steel in 16 or 14 gauge with #4 finish
• Seamless edge panel
• Low maintenance
• Fire rated up to 3 hours or non-rated as specified
• Stainless steel frame standard
• Gasketing available to prevent thermal infiltration

The TPR UniLock® is the only trailer-positioned vehicle restraint that can automatically remove “RIG Wedge” pressure. RIG Wedge is caused when the trailer is pushed forward during loading/unloading, and the trailer’s Rear Impact Guard (RIG) applies so much pressure to the restraint’s hook that the truck driver must reverse the trailer in order to release the restraint. The UniLock has an advanced cam design that first rotates the hook away from the RIG to remove the pressure, and then rotates down to a stored position.

The UniLock vehicle restraint also has an internal safety mechanism that locks the restraint’s hook in place when pressure is applied, maintaining a secure engagement. This makes it universally effective on any obstructed RIG, including intermodal trailers with cover plates that prevent the restraint’s hook from latching on top of the RIG.

The UniLock is designed to withstand a pulling force in excess of 32,000 lbs and has a service range of 4” to 10” horizontally from the face of the dock bumpers and 9” to 30” vertically above drive approach. The integral motor, gear and brake assembly is specifically designed for the UniLock. The UniLock vehicle restraint is highly adaptable to new or existing loading docks.

Features

• Horizontal service range from face of dock bumpers – 4” to 10”
• Vertical service range above drive approach – 9” to 30”
• Withstands pull force in excess of 32,000 lbs

Metro Dock’s Vertical Storing Dock Levelers are perfect for food and beverage handling facilities, cold storage and other applications requiring environmental or security control. When not in use, the dock is stored in an upright position, allowing the overhead door to close to the pit floor. This feature provides clear access to the loading area for easy cleaning, reducing the risk of debris or pests entering the building.

Features

• Available in 40, 45 and 50,000 lbs capacities
• I-beam construction
• 1HP Wall-Mount Power Packs available in any voltage
• Safety stand

The VH Series is a fully hydraulic, feature-packed leveler for the value minded consumer. It combines a structural steel ramp design with a proven hydraulic operation to produce a safe, reliable, yet economic hydraulic dock leveler.

Features

• Push-button activation
• Hydraulic operation 30,000 – 80,000 CIR
• Structural steel with plate outboards, four-sided box construction
• Piano-style front and rear hinges
• Hoist cylinder with internal velocity safety stop
• Recessing lip cylinder
• Sliding toe guards
• Fluid logic block
• Optional barrier lip
• Max standard width – 7′
• Max standard length – 12′

Poweramp’s® VS Series vertical storing dock leveler offers unmatched environmental control for customers with food storage or temperature sensitive applications. By storing in the vertical position, the VS Series allows the overhead door to form a perfect seal to the pit floor. VS Series levelers offer improved cleanliness, overhead door protection, increased security, improved productivity and easy maintenance.

These levelers come in 6’, 6’6” and 7’ standard widths, and 5’ and 6’ standard lengths. Other lengths may be available upon request. Standard capacities for the VS Series are 40K, 45K and 50K CIR.

Features

• Standard widths – 6’, 6’6” and 7’
• Standard lengths – 5’ and 6’
• Standard capacities – 40K, 45K and 50K CIR